QG ADHESIVES
Hochtech Super Glue
Directions for Use:
- Apply Spray Super Glue Cyanoacrylate Adhesive to one of the surfaces to be bonded or fixed.
- Apply the Spray Super Glue Organic Accelerator spray to the other surface.
- Immediately join the surfaces together & apply even pressure.
Note:
- Contaminated surfaces may require specific cleaning or degreasing prior to application to ensure proper bonding.
- Wearing rubber or plastic gloves is recommended.
Warning:
Eye Contact: In case of accidental eye contact, flush immediately with plenty of water and seek medical attention.
Skin Contact: After skin contact, wash immediately with plenty of soap and water.
Caution: This activator is highly flammable.
Storage:
Do not store near oxidizing agents or combustible materials.
Store Activator in a dark place when not in use.
For optimal shelf life, keep the product in a cool, dry place between 10°C and 25°C.
Product Description:
Spray Super Glue Organic Accelerator is a CFC-free, solvent-based surface activator. It is specifically designed to accelerate the curing time of adhesives to approximately 3 seconds.
Liquid Properties
Chemical type Organic Accelerator
Appearance Clear, Amber
Specific Gravity @ 25˚c 0.68
Viscosity @ 20˚c .mPa.s 0,4
Flash Point(TCC),˚c -22(HIGHLY FLAMMABLE)
Drying time @ 20˚c, Seconds <30s
Typical Applications:
Spray Super Glue Organic Accelerator is used in applications where an exceptionally fast curing time (around 3 seconds) foradhesives is required.
SAFETY PRECAUTIONS:
Flammability Hazard:
Exercise extreme caution to prevent contact of the activator or its spray with open flames or non-flame retardant electrical equipment.
Material Compatibility:
The solvents in this product may affect certain plastics or coatings. Always test compatibility on a small, inconspicuous area before full application.
Ventilation:
Use only in a well-ventilated area.