QG ADHESIVES

QG-1144

Usage

QG-1144 Spray Adhesive is suitable for bonding materials such as sponge, foam, fabric, leather, paper, plastic, and metal foils. etc.

Instruction

1. Pour the QG-1144 Spray Adhesive into the steel tin of the gun. Adjust the air compressor pressure to 6-8 kg/cm² and maintain a distance of 40-50 cm between the nozzle and the target surface.
2. If the QG-1144 Spray Adhesive is too thick, it can be diluted with organic solvents such as chloroform, acetone, and ethyl acetate.
3. Uniformly spray a coat of QG-1144 Spray Adhesive onto both target surfaces. Allow it to dry for 1-5 minutes, then press the surfaces together to bond.

Specific instructions.

1. Make sure the spray gun is working and not having water in it.
2. Make sure the operating workshop is in good ventilation.
3. When operating, stay away from fire and prevent the static. Any operation causing sparks must not be carried out within 50 meter.
4. Clean the surface of the target materials to make sure no grease, dust or other stains.
5. Please apply QG-1144 Spray Adhesive uniformly on the target surfaces.
6. The nozzle of the gun and the surface should form a 45 degree angle.
7. The spray distance (the gun and the surface) better be 0.5 meter.
8. The normal pressure of the gun should be 6-8 kg.
9. The spray should be like fan-shape or minute particles.
10. QG-1144 Spray Adhesive should not be too thick, best coating the surface evenly.
11. Steadily and uniformly move the gun in operation.
12. After applying QG-1144 Spray Adhesive on the surface, leave it to dry for 1-5 minutes (or when the applied QG-1144 Spray Adhesive coat is not sticky to your hand), then it is okay to bond.
13. Pressing the surface properly can get better result.
14. Certain materials or craftworks require QG-1144 Spray Adhesive coat being heated or pressed as per the user’s requirement.
15. Clean the gun when it is not used.
16. Influences of proper spraying.
17. QG-1144 Spray Adhesive coat which is too thin will lead to weak adhesion
18. QG-1144 Spray Adhesive coat which is too thick results in high cost, slow drying and QG-1144 Spray Adhesive accumulation.
19. Uneven QG-1144 Spray Adhesive coat will cause accumulation and partial cracks.

Warning

1. Please test the product on your materials before using it in large quantities.
2. The product is flammable, and should be sealed and stored in a cool place.
3. It is not appropriate for people with nervous system disorders, anemia, hypertension, liver troubles, kidney troubles, those who are pregnant, or nursing mothers to use the QG-1144 Spray Adhesive for extended periods
4. Keep the product away from children, and prevent ingestion.
5. Please keep the product in a well-ventilated area and away from fire during transportation and storage.